Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-325test card-mem
2
Field descriptions
test card-mem
This command executes a sequence of tests on the memory card in the
specified switch processor element. The test sequences in order for both long
and short options are listed in the following table:
These tests verify the sanity of the memory card device, the basic
read/erase/write operations to the memory card, the integrity of the translation
data stored in the memory card, the function of 12-volt power supply used for
memory card erase/write operations, and the translation capacity of the memory
card. This command can also help troubleshoot the following hardware errors:
CARD-MEM, 12V-PWR, CAP-MEM, and FL-DATA.
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Test No
The test being executed
Result
Test result: Pass, Fail, Abort, Disabled, No Board, or Extra Board.
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
Test Short Long
12 Volt Power Supply Test (#701) X X
Memory Card Insertion Test (#695) X X
Memory Card Format and Read Test (#696) X X
Memory Card Match Test (#697) X X
Memory Card Write-Protected Test (#698) X X
Memory Card Directory Recovery Test (#699) X X
Memory Card Translation Data Integrity Test (#694) X
Memory Card Erase/Write/Read Test (#693) X
Memory Card Capacity Test (#1014) X