Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-95ANN-BD (Announcement Circuit Pack)
3
Uploading/Downloading Announcements
Integrated announcements on the TN750 Announcement circuit pack can be
uploaded to the memory card with the administration terminal
save
announcements
command. Likewise, integrated announcements can be
downloaded to the Announcement circuit pack with the
restore announcements
command. Both of these commands require a free data module of NETCON type
to be administered, a data module of announcement type (on the Announcement
circuit pack) to be administered, and a memory card. These commands are
useful in maintaining the customer’s recorded announcements. Depending on
system traffic, announcement uploads and/or downloads take between 30 and
45 minutes.
The system
automatically
tries to download the Announcement circuit pack five
minutes after it is inserted. This automatic download procedure is aborted if:
1. An announcement is recorded within 10 minutes of circuit pack insertion.
2. An announcement download is invoked sooner with the administration
terminal
restore announcements
command.
3. No announcement and/or NETCON data module is administered.
4. Either the announcement data module is busy or all the administered
NETCON data modules are busy.
5. No memory card is in the system.
6. The memory card in the system does not have a valid announcement file
saved on it.
Hardware Error Log Entries and Test to Clear
Valu es
Table 3-36. Announcement Circuit Pack Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm Level (See
WARN I NG
message below)
On/Off
Board Test to Clear Value
0
1
0 Any Any Any test board PCSS sh r 1
1 (a) 0 Circuit pack
removed or SAKI
Test (#53)
MINOR ON
2 (p) None
14 (b) 1 to 64 Announcement
Checksum Test
(#209)
Continued on next page