DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-196reset board
2
reset board
This command performs a soft reset of every specified, administered port on the
port circuit pack. Ports must be busied out before the port circuit pack resets.
!
WARNING:
This command is service disrupting and may cause extraneous alarms.
Output
The following example shows the output from the
reset board 1c07
command
and assumes that the board in port network 1, carrier c, slot 7 is an analog board
with three administered ports.
Field descriptions
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
reset board
location
repeat
number
Physical location of board:
PCSS
Number of times command
repeats (1– 99)
init
inads
craft
nms
carrier = 1
repeat
number = 1
none
Port
Port address (cabinet-carrier-slot) of the reset maintenance object.
Maintenance Name
Type of reset maintenance object.
reset board 1C07
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C07 ANL-BD 53 PASS
Command Successfully Completed