DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-102list configuration
2
NOTE:
The
list configuration software-version
command is discussed
separately under its own heading.
Hardware Groups
Enter one of the following hardware groups:
carriers all
Displays all circuit packs administered and/or physically inserted
in the port, switch node, and control carriers on the system.
board PCSS
Displays all assigned ports on the circuit pack specified by
cabinet, carrier, and slot.
carrier c
Displays all circuit packs and assigned ports on a specified
carrier.
control
Displays all circuit packs in the control complex.
ds1
Displays all the DS1 (TN722, TN767, and TN464) port circuit
packs administered and/or physically inserted.
port-network pn#
Displays all circuit packs located in a specified port network. (
List
cabinet
gives the port network number(s) associated with a
particular cabinet.) Circuit packs on switch node carriers are not
displayed when the port-network qualifier is entered. To display
switch node circuit packs, use the
all
,
carrier
or
board
qualifiers.
stations
Displays all circuit packs that can be assigned stations, including
DS1 circuit packs for remote stations.
trunks
Displays all circuit packs that can be used for administering
trunks.