Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-114list ip-route
2
list ip-route
This command displays a list of the IP routes from DEFINITY ECS out to the LAN.
You may enter the “board” parameter and specify which C-LAN circuit pack for
which to show the IP routes (for example,
list ip-route board UUCss
).
Output
The following example shows the output from the
list ip-route
command.
Field descriptions
Object
The qualifier, or second phrase of the command, specifying the
particular thing being acted upon by the command. Twelve characters
is enough to uniquely identify each object.
NOTE:
Where the object is multiple words in length, only the first word
will be displayed in the object field. All succeeding words will be
treated as qualifiers. This field is truncated after twelve
characters to allow enough space for qualifiers.
Qualifier
One or more qualifiers describing the characteristics of the
action/object pair. This field is truncated after 31 characters to keep
information for a command on a single line.
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list ip-route
board UUCss
Board Location
Example:
list ip-route board 01A03
init
inads
craft
none none
Route Number
IP-route number
list ip-route
IP ROUTING
Route Destination C-LAN Route Accepted
Number Node Gateway Port Metric Type by C-LAN
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx