DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-360test packet-interface
2
Output
The following example is the output for the
test pkt port-network 1
command.
The responses display on a test-by-test basis with one line of data for each test
result.
Field descriptions
test packet-interface
This command performs hardware diagnostic tests on the packet interface circuit
packs in a specified carrier. Tests performed include local memory checksum
tests and checks of failure counters.
Port
Port network number (1)
Maintenance
Name
The name of maintenance object being tested.
Alt. Name
Not applicable.
Test No
The test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
test pkt port-network 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
PN 01 PKT-BUS 571 PASS
PN 01 PKT-BUS 572 PASS
PN 01 PKT-BUS 573 PASS
Command successfully completed