DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-684HYB-LINE (Hybrid Line)
3
HYB-LINE (Hybrid Line)
Hybrid Line is the user-friendly name for Hybrid Line, which was previously used
to denote the Multifunction Analog Telephone. The Hybrid Line set is also known
as an SCS (Small Communications System).
The TN762B Hybrid Line circuit pack supports eight of these multifunction
analog telephone sets, as shown in the following figure. The Hybrid Line sets use
three pairs of wires: an analog voice pair, a transmit/receive pair, and a power
pair.
Figure 3-20. Hybrid Station Interactions
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, ..., etc.); and pp is the 2-digit port number (for
example, 01).
Full Name of MO
HYB-LINE Minor test port PCSSpp l Hybrid Line
HYB-LINE Warning test port PCSSpp l Hybrid Line
PBX
PORT
(1)
VOICE
TERMINAL
HYBRID LINE
(8)
PORT
VOICE
TERMINAL
HYBRID
CIRCUIT
PACK
LINE