Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-58display communication-interface hop-channels
2
display communication-interface
hop-channels
This command displays the translation data for hop channels. A hop channel is a
bi-directional network channel between two interface links for DCS message
hopping. A hop channel is used to tandem DCS messages from one interface
link to another interface link. See
‘‘status link n’’
for more details.
Output for Hop-channels qualifier
When you enter the command
display comm hop
, the systems displays the Hop
Channel Assignment screen, similar to the screen below. The number of the local
processor channel, used to hop the interface link channels, is not shown.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
communication-
interface
hop-
channels
print|
schedule
Number of the local processor
channel
Report sent to printer
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue
and is executed at the specified
time. The information displayed
by the command is sent to the
system printer instead of the
screen.
1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
none none
Link/Channel A
First of the two link/channels joined by the hop channel. Links
range from 1 to 16. Channels range from 1 to 64. The
link/channel must not be assigned to a local processor channel
or to a PRI local processor channel.
display communication-interface hop-channels Page 1 of 4
HOP CHANNEL ASSIGNMENT
Link/Chan Priority Link/Chan Priority Link/Chan Link/Chan Priority
3 1 4 12