DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-46display alarms
2
Field descriptions
Port
Lists the location codes for the alarmed object, as follows:
■ Circuit packs locations display as:
cabinet-carrier-[slot]-[circuit]. Example:
01C0702
.
■ Port network locations display as: port network number-bus.
Example:
PN 02B
. PN 02 = Port Network (PN) number and A
or B = bus.
■ Fiber link locations display as: fiber link number-PNC side.
Example:
x A-PNC
. “X” = fiber link number and “A” = PNC
side [A or B].
Maintenance
Name
Lists the logical name of the maintenance object with the alarm.
On Brd
A
y
(yes) indicates the fault was found on the associated circuit
pack. A
n
(no) indicates the fault is
not
connected to the circuit
pack.
Alt Name
Identifies the location of maintenance object, as follows:
■ Station = extension number
■ Trunk = Group number (78/__) or group and member
numbers (78/01)
■ Private CO Line = private CO line (P) and group number.
(P/xxx)
Alarm Type
Alarm level: MAJOR, MINOR, or WARNING
Service State
Service state of the station and trunk ports:
■ RDY = ready for service
■ OUT = out of service
■ IN = in service
■ [Blank] = No associated service state