DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-10busyout mis
2
busyout mis
This command places a management information system in the maintenance
busy state. No periodic or scheduled maintenance is performed on the busied
out mis until it is released. When the object is busied out no call processing
activity may be performed over the link. A warning alarm (error type 18) is
generated on the busied out mis, so that INADS can determine its state. The
command,
release mis
, reactivates the busied out mis.
Output
The following example shows the output from the
busyout mis
command. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout mis
Example:
busyout mis
init
inads
craft
cust
rcust
None None
Port
Not applicable
Maintenance Name
Name of busied out maintenance object:
MIS
Alt. Name
Not applicable
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
busyout mis SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
MIS PASS
Command Successfully Completed