Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-124list measurements ds-1
2
Field descriptions (list measurements ds1 log)
Counted
Since:
The start time and date when the associated measurement counters
were cleared or the DS1 circuit pack was administered.
DATE
The date of the 15-minute interval.
TIME
The time of the 15-minute interval.
ERRORED
SECONDS
The value of the errored seconds counter for the specified 15-minute
interval (0 - 900 or N/A if data for the 15-minute interval is invalid).
BURSTY ERR
SECS
The value of the bursty errored seconds counter for the specified
15-minute interval (0 - 900 or N/A if data for the 15-minute interval is
invalid).
SEVERELY ERR
SECS
The value of the severely errored seconds counter for the specified
15-minute interval (0 - 900 or N/A if data for the 15-minute interval is
invalid).
FAILED
SECONDS
The value of the failed seconds counter for the specified 15-minute
interval (0 - 900 or N/A if data for the 15-minute interval is invalid).
VALID
INTERVAL
This field indicates whether the data for the specified 15-minute interval
is valid. Data is considered valid when a count for that 15-minute
interval. If the field has a value of
y
, the data for the four error
categories is valid; otherwise, the data is invalid.
Data is considered valid when a count for that 15-minute interval is
retrieved and none of the following invalid conditions occur:
— If a system warm start or a system cold start occurred during the
interval
— If the DS1 circuit pack was not inserted during the interval
— If the system time was changed during the interval
— If the system was too busy to respond to a poll request for the
interval.
list measurements ds1 log 2a19 SPE A
Switch Name: Date: 1:26 pm THU APR 16, 1992
DS-1 Link Performance Measurements Detailed Log Report
Counted Since: 1:20 pm THU APR 16, 1992
ERRORED BURSTY SEVERELY FAILED VALID
DATE TIME SECOND ERR SECS ERR SECS SECONDS INTERVAL
4/16 13:05 0 0 0 0 y
4/16 13:20 0 0 0 0 y
Command successfully completed