Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-113ANN-PT (Announcement Port)
3
Hardware Error Log Entries and Test to Clear
Valu es
Notes:
a. This error type indicates that the circuit pack has been removed or has
been insane for more than 11 minutes. To clear the error, reinsert or
replace the circuit pack.
b. This error is logged and the port is alarmed when an alarm is raised on the
Announcement circuit pack because of a faulty condition with a common
circuit pack resource. Any one of the following alarmed errors on the
Announcement circuit pack causes this error to be logged against the
Announcement Port: 1793, 2049, 2305, 2561. Follow the ANN-BD
(Announcement Circuit Pack) Maintenance documentation to resolve
these alarms. When the corresponding circuit pack alarm is cleared, this
alarm clears.
Table 3-43. Announcement Port Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
0 Any Any Any test port PCSSpp sh r 1
1 Playback Speech
Memory Array
(PSMA) Test (#206)
MINOR ON test port PCSSpp sh r 3
18 0 The port was
busied out
WARNING OFF release port PCSSpp
130 (a) None WARNING ON test port PCSSpp sh
257
Channel
Administration
Memory Array
(CAMA) Test
(#205)
MINOR ON test port PCSSpp l r 3
17667 In-line error
513
140AY Channel
Sanity Inquiry Test
(#222)
MINOR ON test port PCSSpp sh r 3
17684 In-line error
769 (b) None
Continued on next page