DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-19busyout trunk
2
number. Warning alarms (error type 18) are generated on each busied out
maintenance object, so that INADS can access the state of the objects. The
release trunk
command reactivates the specified trunk group or group member.
NOTE:
If the user enters
busyout trunk <group number>/
, the lowest
port-location in the group is busied out.
This s NOT recommended.
Output
The following example is a display of the
busyout trunk
command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout trunk
group
member
Trunk group number (1–99)
Number of a particular trunk within
a trunk group (1 – 99)
Examples:
busyout trunk 78
busyout trunk 78/1
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance Name
Type of busied out maintenance object.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
busyout trunk 78/1 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1505 CO-TRK 78/01 PASS
Command successfully completed