Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-194ATM-NTWK (ATM Network Error)
3
88 (a) Incompatible destination. This cause indicates that the equipment
sending this cause has received a request to establish a call which
has Broadband low layer information, Broadband high layer
information, or other compatibility attributes which cannot be
accommodated.
89 (a) Invalid endpoint reference value. This cause indicates that the
equipment sending this cause has received a message with an
endpoint reference that is currently not in use on the user-network
interface.
91 (a) Invalid transit network selection. This cause indicates that a transit
network identification was received in an incorrect format as defined
in Annex D.
92 (a) Too many pending add party requests. This cause indicates a
temporary condition when the calling party sends an add party
message, but the network is unable to accept another add party
message because its queues are full.
93 (a) AAL parameters cannot be supported. This cause indicates that the
equipment sending this cause has received a request to establish a
call with ATM adaptation layer parameters that cannot be
accommodated.
PROTOCOL ERROR
96 (a) Mandatory information element is missing. This cause indicates that
the equipment sending this cause has received a message that is
missing an information element.
97 (a) Message type non-existent or not implemented. This cause indicates
that the equipment sending this cause has received a message with a
message type it does not recognize either because this is a message
not defined or defined but not implemented by the equipment sending
this cause.
99 (a) Information element non-existent or not implemented. This cause
indicates that the equipment sending this cause has received a
message that includes information element(s) not recognized
because the information element identifier(s) are not defined or are
defined but not implemented by the equipment sending the cause.
This cause indicates that the information element was discarded.
However, the information element is not required to be present in the
message in order for the equipment sending this cause to process the
message.
Table 3-81. Error Codes and Aux Data values ATM-NTWK — Continued
Cause Code/
Error Type
Aux
Data Cause Codes Description
Continued on next page