DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-148list mst
2
R1:
Types of failure:
0x01 - outgoing ISDN
0x02 - incoming ISDN
R3:
Types of failure:
0x01 - outgoing ISDN
0x02 - incoming ISDN
NOTE:
In abbreviated format, the header of the Q.931 message, the cause IE (if
present) and the channel id IE (if present) are the only IEs present.
An additional cancel byte (0xCA) may be present after the standard
ISDNBRI formatted message if the message was not sent. The cancel byte
will not be appended if the abbreviated format is selected.
General
0x71 - GAP marker
Message[7,8] = Link ID
Message[9] = type of failure
Message[10+] = standard ISDNBRI format
Message[7-10] = Link ID
Message[11] = type of failure
Message[1] = GAP reason
Message[2] = GAP count (since last clear - high byte)
Message[3] = GAP count (since last clear - low byte)