Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-223status audits
2
Feature Interactions
The
clear audits
command affects the data displayed by
status audits
cumulative
and
status audits peak-hour
. The
clear audits cumulative
command clears data collected to date, resets the start time kept for that data,
and clears peak hour data. The
clear audits peak-hour
command clears data
kept for the peak hour so that a new peak hour can be established.
When the
schedule
option is specified, a scheduling form is displays allowing
the technician to schedule command execution. Refer to the Report Scheduler
and System Printer feature specification [3] for details about the scheduling form.
Table of audits
The following table shows the names of the audits that are run as part of time
available maintenance, the audit number (pname) and a short description of
each audit. These audits execute using lname MO_DR_AUDIT (8192). These
audits may execute using the
test MO
command with lname 8192, pname “audit
number,” and test number 0 (for example,
test MO l 8192 p 607 t 0
executes the
AC state audit).
Most Recent Error
Date and time that the audit last detected fixed data, could not fix
data or audit aborted problems since the last "clear audits
cumulative" command. Example: 03/27/14:31 for 2:31 pm, March
27th. This field appears with the
status audits cumulative
display.
Audit Name
Audit
Number Description
AC-ISG 607 AC state audit
ADJUSR 595 Adjunct user record audit
ADMTRM 559 Administration terminal audit
ANUR-A 589 Announcement user record audit
AN-ADM 574 Announcement group administration audit
AN-CALLS 572 Announcement group calls audit
AN-QUE 577 Announcement group queue audit
AQSA 545 ACB queue slot allocation audit
ASLINK 606 ASAI link status audit
ASYLED 605 ASAI yellow LED audit
ATACT 558 Attendant active audit