Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-134list mst
2
In message types other than 50 and 51 (Level 2 Primitives), following the port
address is a one octet field called the qualifier. The meaning of the qualifier
varies according to the type (as specified by the MST encode) of ASAI message
traced. The body which is a real ASAI message (except for Level 2 Primitives)
follows the qualifier.
When the display is administered for abbreviated format, the body contains only
the initial part of the ASAI message (all information in beginning of message up
to and including the Q.931 IE tag) plus the cause IE (if present).
0x50 - ASAI level 2 uplink primitive
R1:
Message[1] = Port Network Number of ASAI port
Message[2] = reserved
Message[3] = Carrier Address of ASAI port
Message[4] = Port number of ASAI port
Message[5] = SAPI
Message[6] = TEI
Message[7,8] = Link ID
Message[9] = Uplink encode
0x01 - ASAI Link State
0x02 - TEI Management Message
0x03 - XID Message
Message[10] = R1/R3 Link States:
0x00 - the link has gone down
0x01 - the link has come up
0x02 - the link id has changed
0x03 - the link has gone hyperactive
0x04 - the link has recovered
0x05 - the audit recovery stim
0x06 - the link has been reset
0x07 - link state hyper (too many SABMEs) disconnect
0x08 - broadcast link audit
= R1/R3 TEI Management Message
0x01 - Identity request
0x05 - Identity Check Response
0x07 - Identity Verify Request
= R1/R3 XID Messages
0x01 - XID Request
0x02 - XID Response