DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-276status esm
2
Field descriptions
status esm
This command displays the link status and equipment and software revision
identifiers for the Expansion Service Module (ESM). See in for more information.
Data Ext/Sta Ext
for Stn DM
The data module extension number. The DTDM is an exception: the
connected station extension is shown.
Port/Channel
Number
The port location of the data module (cabinet-carrier-slot-circuit). If
the data module specified is a data channel, the channel number
will be shown instead.
Service State
This entry displays the status of the data module; valid states are:
— In-service/idle
— The data module is present but not in use.
— In-service/active
— The data module is present and is in use.
— Out-of-service
— The data module has been removed from service
— Disconnected
— The data module no longer appears to be present
CF Destination Ext
This entry displays the call forwarding destination, if any, of the
station.
Maintenance Busy?
Whether maintenance is testing the object, “yes” or “no”.
Connected Ports
Port locations to which the data module is connected
(cabinet-carrier-slot-circuit).
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status esm
init
inads
craft
none none