DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-194release tone-clock
2
Field descriptions
release tone-clock
This command removes specified tone/clocks from maintenance busy states.
Output
The following example shows the output from the
release tone-clock 1a
command.
Field descriptions
Port
Port network number (preceded by “PN”) and bus (“A” or “B”)
associated with the TDM bus.
Maintenance Name
TDM-BUS
Alt. Name
Not applicable
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release
tone-clock
location
Physical location of the tone/clock:
PC
init
inads
craft
1 (one) none
Port
The tone clock circuit pack maintenance object displays the
cabinet and carrier of the specified tone/clock board.
Maintenance Name
TONE-PT, TDM-CLK and TONE-BD
Alt. Name
Not applicable.
release tone-clock 1a
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01A TONE-PT PASS
01A TDM-CLK PASS
01A TONE-BD PASS
Command successfully completed