Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-104list configuration software-version
2
The following display shows output from the
list configuration ds1
command.
Field descriptions
list configuration software-version
This command displays
■ Software version numbers and compatibility indexes of the software load
modules stored in system memory (RAM) and on the Mass Storage
System devices (tape).
■ The dates and times when translation and announcement data were last
saved to the MSS.
■ Information about any software update files that have been applied to the
system. See “Software Upgrade” in Chapter 1, ‘‘Maintenance for csi
systems’’ for an explanation of software versions and compatibility
indexes.
Signaling
This field is displayed only when
list configuration ds1
is entered. The
contents of the field are the same as the signaling mode administered for
the ds1 circuit pack or
none
if the circuit pack is not administered.
Name
This field is displayed only when
list configuration ds1
is entered. The
contents of the field are the same as the signaling mode administered for
the ds1 circuit pack or
none
if the circuit pack is not administered.
CSU MOD
This field is displayed only when
list configuration ds1
option is
selected. The field contains the identification number of the Integrated
CSU module present on the DS1 circuit pack (TN767E or later / TN464F
or later) or
none
. If the circuit pack is a TN464E or TN767D,
unknown
displays. If the circuit pack is a TN464D or TN767C or earlier suffix DS1
board, then
n/a
displays.
list configuration ds1
SYSTEM CONFIGURATION - DS1 Circuit Packs
Location Code Vintage Signaling Name CSU MOD
01B05 TN464F 000002 isdn-pri 120A1
01B06 TN464D 000002 isdn-pri n/a
01B10 TN767C 000003 none n/a
01B11 TN767E 000003 robbed-bit 120A1
01B12 TN767E conflict none <blank>
01C06 no board none <blank>
01C13 TN464E 000003 common-channel unknown
01C16 TN767D 000024 robbed-bit unkonwn
01C18 TN464F 000002 isdn-pri none