Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-31Logging On/Off
1
4. Enter super-user or non-super-user in the
Service Level
field. Default is
non-super-user.
■ “super-user” gives access to the
add, change, display, list,
and
remove
commands for all customer logins and passwords. The
super-user can administer any mix of super-user/non-super-user
logins up to a total of ten additional system logins.
■ “non-super-user” permissions are limited by restrictions specified
by the super-user when administering the non-super-user login. A
non-super-user can change his/her password with permission set
by the super-user, however once a password has been changed
the non-super-user must wait 24 hours before changing the
password again. A non-super-user cannot change other user
passwords, login characteristics, or permissions.
5. Enter
y
in the
Disable Following a Security Violation
field to
disable a login following a login security threshold violation. This field is a
dynamic field and only appears on the Login Administration form when the
SVN Login Violation Notification feature is enabled. The system default for
the
Disable Following a Security Violation
field is
y
.
6. Enter
y
in the
Access to INADS Port?
field to allow access to the
remote administration port. This field only displays if Acct. has first
enabled customer super-user access to the INADS Remote Administration
Port. Default is
n
.
7. Enter a password for the new login in the
Login’s Password
field. A
password must be from 4 to 11 characters in length and contain at least 1
alphabetic and 1 numeric symbol. Valid characters include numbers,
and!&*?;’^ (),.:- (the system does not echo the password to the screen as
you type).
8. Re-enter the password in the
Login’s Password
field. The system does
not echo the password to the screen as you type.
9. Enter the number of days (1 to 99) from the current day, that you want the
password to expire, in the
Password Aging Cycle Length
field. If a
you enter a blank in this field, password aging does not apply to the login.
10. Decide whether or not to leave the default of yes in the
Facility Test
Call Notification?
field. If
y
is selected, the user receives
notification at logoff that the facility test call feature access code is
administered. If you do not want the notification to appear, set the field to
n
.
!
CAUTION:
Leaving The facility Test Call administered after logging off poses a
significant security risk.