DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-295status processor-channel
2
Output
The following example shows the output from the
status processor-channels 1
command.
Field descriptions
Channel Number
The processor channel number 1-64.
Channel Status
State the channel is in:
1. Channel is not administered.
2. Channel is administered but not used.
3. Channel is in a state entering “wait session accept” (WSA).
4. Channel is in a state waiting for a “session accept” message
from the far end.
5. Channel is waiting for action.
6. Channel is in data transfer state (channel up and running).
7. Channel is in resynchronization state.
8. Channel is waiting for acknowledge of disconnect message.
9. ISDN-PRI Channel is currently down.
10. ISDN-PRI Channel is in the data transfer state (that is, channel
is up and running).
Reset Count
Number of times reset has been issued for this channel
Message Buffer
Number
Number of message buffers currently used for communication on
this channel.
Link Number
Physical SCI link (1-8) associated with the channel
Retransmission
Count
Number of times that message retransmission has occurred
status processor-channels 1
PROCESSOR CHANNEL STATUS
Channel Number: 1
Channel Status: 6: In data transfer state
Reset Count: 3
Message Buffer Number: 1
Link Number: 4
Retransmission Count: 5