DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-189release port
2
release port
This command deactivates specified ports on circuit packs.
Output
The following example shows the output from the
release port 1c0701
command
and assumes that the port in cabinet 1, carrier c, slot 7, circuit 1 is an analog
port.
Field descriptions
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release port
location
Physical location of the port:
PCSS
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance Name
The type of maintenance object that is being released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release port 01C0701
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 ANL-LINE PASS
Command successfully completed