Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-235status card-mem
2
system goes down. Then, the error logs file reads back when the system restarts.
The Hard Patch feature also uses the memory card as temporary storage when
LMM applies patched files to the system software.
The
status card-mem
command displays the following memory card information
located at active or standby SPEs:
■ Is a valid memory card in place?
■ Is the memory card write-protected?
■ What is the capacity of the inserted memory card?
■ What kind of system configuration - small or medium?
■ What is the number of pulses counted in the last erase operation?
■ What is the percentage of translation storage space used?
■ What are the names of files stored in the memory card, and what is date
and time (if available) when it was saved?
Feature Interactions
■ If the Announcement feature is unavailable in the system features
configuration, the
Data Present
field is always
n
for the announcements
file. The Announcement feature requires a memory card with a minimum
capacity of 4 MB. If the memory card is less than 4 MB, Announcements
cannot be save in the memory card.
■ Core Dump features require 10 MB memory cards for saving core dumps.
If the memory card has a capacity less than 10 MB, the core dump
operation fails.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
card-mem
location
print
Physical carrier position of memory
card:
PC
(1A).
Report sent to printer
init
inads
craft
cust
rcust
nms
bcms
browse
none see below