DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-21change circuit-packs
2
Output
The following example is a display of page 1 of the
change circuit-packs 1
command when DEFINITY AUDIX is Administered by entering
TN566
in slot 8.
If
TN566
is entered for slot 8 and any of the 2 slots before it or 1 slot after it are
occupied, the following error message displays:
Remove installed equipment from reserved 2 previous and 1
next slots
The following is an example of page 1 of the change circuit-packs form when
MAPD is administered by entering
TN800
,
TN801
, or
TN802
in slot 7.
change circuit-packs 1 Page 1 of 5
CIRCUIT PACKS
Cabinet: 1 Carrier: A
Carrier Type: processor
Slot Code Sfx Name Slot Code Sfx Name
01: TN798 PROCESSOR 11:
02: TN2182 TONE/CLOCK 12:
03: 13:
04: 14:
05: 15:
06: ADX8D RESERVED-AUDIX-8D 16:
07: ADX8D RESERVED-AUDIX-8D 17:
08: TN566 MULTI-FUNCTION 18:
09: ADX8D RESERVED-AUDIX-8D 19:
10: 20:
’#’ indicates circuit pack conflict.
change circuit-packs 1 Page 1 of 5
CIRCUIT PACKS
Cabinet: 1 Carrier: A
Carrier Type: processor
Slot Code Sfx Name Slot Code Sfx Name
01: TN798 PROCESSOR 11:
02: TN2182 TONE/CLOCK 12:
03: 13:
04: 14:
05: 15:
06: ADX8D RESERVED-AUDIX-/CON 16:
07: TN800 MAPD 17:
08: TN769 ANALOG LINE 18:
09: TN769 ANALOG LINE 19:
10: TN769 ANALOG LINE 20:
’#’ indicates circuit pack conflict.