Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-312status tti
2
Field descriptions
status tti
This command displays the status (active/not active) of the tti background
maintenance task, and, if it is active, it displays whether tti ports are being
generated or removed, the number of tti-supported boards that have processed,
and the number of tti-supported boards that have not yet been processed. The
display also includes the elapsed time since the background maintenance task
started.
TSC Index
The administered TSC index (1-64).
TSC State
State of the administered TSC:
■ inactive
: the administered TSC is not functioning (for example,
D-channel out-of-service, or disabled)
■ active
: indicates that the administered TSC is up and user
information can be exchanged end-to-end.
■ pending-inactive
: shows that the TSC is being released.
■ pending-active
: the TSC is about to come up
Establish
The switch responsible for the origination of the administered TSC:
■ as-needed
: TSC is established on an as needed basis
■ permanent
: TSC is permanently established
Enabled
Indicates if the administered TSC’s have been enabled (“yes” or “no”).
Congested
Administered TSC congestion history (whether or not the network can
handle the receipt of USER INFORMATION messages for the
administered TSC):
■ yes
: TSC is congested
■ no
: TSC is not congested
■ clear
: TSC congestion was cleared during its active period
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status tti
print
Report sent to the printer
Examples:
status tti
status tti print
init
inads
craft
cust
nms
browse
none TTI background
maintenance task is
activated by enabling the
TTI system parameter on
the System-parameters
Features form.