Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-265status conference
2
Endpoint Miscellaneous (EPT MISC) Information.
EPT MISC contains
miscellaneous states and counters for an endpoint. Flags can
y
or
n
. Counters
start with 0x00, increment to 0xff, and wrap around to 0x01.
AIM
and
VIS
are
BAS commands that can be sent as input to MCU from an endpoint or as output
from MCU to an endpoint
Field descriptions
MLP
Multi Layer Protocol data mode. When technicians administer
Data
Modes
as
any-mlp
or
ww-pcs
, MLP modes should be
var-MLP
.
Other values affect video status.
MLP
modes should be
MLP-off
when technicians administer Data
Modes as
none
. Other values in this mode affect video status.
H_MLP
The High Speed MLP mode. The HMLP mode should be
H-MLP-off
.
Other values in this mode will affect video status.
LSD
Low Speed Data mode. The LSD mode should be
LSD-off
. Other
values in this mode affect video status.
HSD
High Speed Data mode. The HSD mode should be
HSD-off
. Other
values in this mode affect video status.
CRYPT
Encryption mode. The CRYPT mode should be
encrypt-off
. Other
values in this mode affect video status.
S/M
Single/Multi channel interoperability mode.
6B-H0-comp
indicates
that the sender is interoperating multiple channels and a single
channel (for example, 6B and H0).
Not-comp-6B-H0
indicates that
the sender is not interoperating between 6B and H0. Normally this
value is
Not-comp-6B-H0
. Other values in this mode affect video
status.
AIM
Audio Indicate Mutes.
“y” = For input, this endpoint mutes its audio. MCU does not VAS to an
endpoint displaying mute. For output, all other endpoints in the
conference mute their audio (have sent AIM to MCU). MCU in turn tells
this endpoint (by sending it AIM) that there is no audio output from
MCU.
“n” = For input, this endpoint does not mute (only if endpoint audio
mode is turned on). For output, an audio path opens across the bridge.
VIS
Video Indicate Suppressed.
“y” = For input, this endpoint suppresses its video (video is muted). For
output, the MCU is not sending video to this endpoint because there is
no video broadcaster (broadcaster does not join or broadcaster’s video
is invalid).