DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-180release board
2
Field descriptions
release board
This command activates administered maintenance objects on the circuit pack at
specified locations.
Output
The following output example is a display of the
release board 1c07
command
and assumes that the board in cabinet 1, carrier c, slot 7 is an analog board with
three administered ports.
Field descriptions
Port
Port address (cabinet-carrier-slot-circuit) of released maintenance.
Maintenance Name
The type of released maintenance object. (wideband access point
=WAE-PORT, single port access endpoint = TIE-DS1.
Alt. Name
Alternate way to identify maintenance objects. This field contains
the extension number of the access endpoint.
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release board
location
Board location:
PCSS
init
inads
craft
nms
none none
Port
Port address (cabinet-carrier-slot) of released maintenance object.
Maintenance Name
The type of maintenance object that is being released.
release board 01C07
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C07 ANL-BD PASS
01C0702 ANL-LINE PASS
01C0701 ANL-LINE 51001 PASS
01C0703 ANL-LINE PASS
Command successfully completed