Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-339CARD-MEM (Memory Card)
3
Memory Card Insertion Test (#695)
This test, which is nondestructive, verifies whether a memory card is inserted into
the memory card slot at the Processor circuit pack and also whether the system
can detect its existence.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2110 ABORT No memory card is inserted.
1. Insert a formatted memory card into the slot at the Processor circuit
pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2111 ABORT Inserted memory card cannot be recognized.
1. Insert a new formatted memory card into the slot at the Processor
circuit pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2112 ABORT Internal system error The inserted memory card is a system-upgrade
memory card.
1. Replace the inserted memory card with a user’s memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
Any FAIL A checksum error is detected in the translation file that is stored in the
inserted memory card.
1. Enter the save translation command, and verify that translations can
be successfully saved onto the memory card.
2. Rerun the test.
3. If the test fails again, replace the memory card, and repeat Steps 1
and 2.
PASS No checksum error is found in the translation file.
Table 3-147. TEST #694 Memory Card Translation Data Integrity Test — Continued
Error
Code
Te s t
Result Description/ Recommendation
Continued on next page