Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-20cancel hardware-group
2
cancel hardware-group
This command temporarily or permanently aborts the execution of a
test
hardware-group
command. To resume testing, enter
resume hardware-group
or
test hardware-group
.
Feature Interactions
■ Scheduled and Periodic Maintenance
When a
test hardware-group
is entered, all activity related to scheduled
background maintenance, periodic background maintenance, and data
audits suspends for the duration of the
test hardware-group
command.
All activity related to scheduled background maintenance, periodic
background maintenance, and data audits restarts if the
test
hardware-group
command is canceled.
■ Status Hardware-group
The
status hardware-group
command displays the state of a canceled
test hardware-group
command as
canceled
.
change circuit-packs
This command allows users to administer circuit packs that are inserted into the
system port, expansion control, and switch node carriers. It is used to configure
the system when circuit packs are not physically inserted.
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
cancel
hardware-group
Examples:
cancel hardware-group
init
inads
none See below
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
change
circuit-packs
cabinet
number
Cabinet number of circuit packs to
change
Examples:
change circuit-packs 1
change circuit-packs 2
init
inads
craft
cust
nms
1 (one) none