Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-128list mst
2
Detailed description of Messages
The terminology Message[n] used below refers to the byte at offset n in the
message being displayed.
MST message types contain a version number. Whenever the structure of the
MST message changes, the version field in the MST buffer will be changed.
Version 1 (default) displays a blank in the version field which is immediately after
the MST message type field. Subsequent versions display the version number
after the MST message type field and are connected with a hyphen (-). For
example: Version 2 of the X.25 Application error/notification message has added
the text of the pm state table stimulus which was ignored.
0x6F ISDNBRI unrecognized message
0x71 GAP marker
0x72 Time changed while trace enabled
0xA0 X.25 Outgoing application data message
0xA1 X.25 Incoming application data message
0xA2 X.25 Application error message
0xB0 X.25 Outgoing session layer control message
0xB1 X.25 Incoming session layer control message
0xCF X.25 Message confirmation
0xD0 X.25 Outgoing processor channel control message
0xD1 X.25 Incoming processor channel control message
0xD2 X.25 Link control message
0xD3 X.25 Link status message
0xE2 X.25 Session Timer Expirations
0xF0 X.25 Error Message (Outgoing Message Lost)
0xF1 X.25 Unrecognized Messages
0xF2 X.25 Error Message (DIP ICOM Record Aborted) (R2 Only)
0xF9 Snapper instrumentation message
0xFA Snapper continuation message (for large msgs)
Table 2-1. Summary of MST Message Types — Continued
Code Description
Continued on next page