Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-266status conference
2
MIS
Multipoint Indicate Secondary-status.
“n” = For output, the endpoint is a valid source (not necessarily at this
moment). n is the correct state for the video.
“y” = MIS was sent to an endpoint considered to be a secondary
endpoint. The endpoint is included in the audio, but not video portion of
the conference. Video is not sent.
MCV
Multipoint Command Visualize.
“y” = For input, an endpoint requests to become a broadcaster. This is
used during Still Frame Graphics and to force “presentation” mode.
TALK
“y” = The VC board detects voice energy from the endpoint. The TALK
counter indicates the number of starts or stops.
VRCV
“y” = The endpoint is receiving video (MCU is sending video to the
endpoint). The VRCV counter counts the number of times video sends
or does not send to this endpoint.
BCTK
Single screen and quad-screen presentation mode conferences.
“y” = The endpoint is the video broadcast source. The BCTK counter
tallies the number of times this endpoint is the video broadcast source.
RTTK
Single screen conferences.
“y” = The endpoint is the return video source. The RTTK counter tallies
the number of times this endpoint is the return video source.
BCLS
Single and quad-screen presentation mode conferences.
“y” = The endpoint is watching the video of the broadcast source.
RTLS
Single screen conferences.
“y” = The endpoint is watching the video of the return source.
HYPR
“y” = Endpoint hyperactivity (MCU isolates endpoints from the MMCH
conference due to “thrashing” behavior) affects the endpoint’s status as
a video source (for 5 seconds of hyperactivity timer). The HYPR counter
tallies the number of times this endpoint is hyperactive.
DMUTE
“y” = The VC board or the software in the MCU mute the decoder. VC
boards mutes the decoder when it loses MMI or endpoint framing, when
it receives invalid audio code words, and when endpoints are
hyperactive. MCU software mutes the endpoint decoder of all
endpoints besides the broadcaster. (when a mode of a conference is
“broadcastw/scan”,broadcast with auto scan) The DMUTE counter
tallies the number of times the VC board mutes this endpoint’s decoder.
VFMT
Quad-screen conferences. This field always defaults to n, indicating
QCIF format.
H.261
“y” = Video framing loss. The H.261 counter tallies the number of times
framing is lost.