Lucent Technologies 555-233-119 Home Theater Server User Manual


  Open as PDF
of 1872
 
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-52ANL-LINE (8-Port Analog Line), ANL-NE-L (8-Port Neon Analog Line)
3
ANL-LINE (8-Port Analog Line),
ANL-NE-L (8-Port Neon Analog Line)
The 8-Port Analog Line circuit packs are:
TN742
TN769
TN467
These circuit packs provide 8 ports for single line on-premises or off-premises
analog endpoints such as analog voice terminals, queue warning level lamp,
recorded announcements, dictation machines, PagePac
paging equipment,
external alerting devices, modems, facsimile machines, and AUDIX voice ports.
The TN769 supports a neon message waiting lamp. The other 8-port analog lines
do not support the lamp.
Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this ringing is disturbing the customer or the terminal equipment,
it should be disabled using the Tests field of the station administration screen.
However, on some releases of the software, this action disables Tests #6, #47,
and #35 as well as Test #48. Test #47 may cause a false alarm when the port is
connected to off-premises equipment, some non-voice terminal equipment, and
some loop equipment. If this is the case, then the test should be disabled using
the Tests field of the
change station
<extension>
command.
No maintenance of the terminal connected to the 8-Port Analog Line circuit pack
or 8-Port Neon Analog Line circuit pack is performed, except to determine
whether or not the terminal is connected. Failures of the neon message waiting
lamp power (for ANL-NE-L only) and the common ringing application circuitry are
reported as part of the Common Port Circuit Pack errors (see errors 1281 and
1793 in the XXX-BD (Common Port Circuit Pack) Maintenance documentation).
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, ..., etc.); and pp is the 2-digit port number (for
example, 01).
Full Name of MO
ANL-LINE MIN test port PCSSpp l 8-Port Analog Line
ANL-LINE WRN test port PCSSpp sh 8-Port Analog Line
ANL-NE-L MIN test port PCSSpp l 8-Port Neon Analog Line
ANL-NE-L WRN test port PCSSpp sh 8-Port Neon Analog Line