DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-19Preventive Maintenance Procedures
1
Figure 1-3. Fan/Filter Removal
Fan Assembly Removal/Replacement
1. Pull (unplug) the fan assembly from the chassis. The power for the fan
automatically disconnects when the assembly is unplugged.
2. Plug in the new fan assembly. The power for the fan automatically
connects when the fan assembly in plugged in.
Replace the fan/filter access panel and the left door.
Fan Filter Removal/Replacement
1. Remove the fan access panel from the left side of the cabinet.
2. Pull the fan filter from the chassis.
3. Clean (vacuum or wash with water) or replace the filter as needed and
slide the filter back into the chassis.
4. Replace the fan access panel.
scdmfltr RPY 072297
Filter
Fan