Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-177ping
2
ping node-name
This command pings an administered node. Look the “
node-name
” up with the
display node-names
command).
ping board
The
board
qualifier specifies which C-LAN circuit pack from which to ping. By
adding the
board UUCSS
qualifier to the command, you can also specify which
C-LAN circuit pack (in the case of multiple C-LAN circuit packs). If only one
C-LAN circuit pack is present, the
board
qualifier is optional.
ping packet-length
The
packet-length
qualifier specifies the packet length of the ping packet.
Packet lengths of from 64 to 1500 bytes can be specified. The
packet-length
qualifier is optional, and if not used, the default packet length is 64 bytes.
Specifying a longer packet length in the command line can show
■ if a router or host has a problem fragmenting or reassembling transferred
packets
■ a more complete indication of the link status
If the packet length is not specified, the default is 64 bytes. You can add the
packet-length
qualifier and the packet size (64-1500 bytes) to the other ping
commands. Some examples include:
■ ping node-name packet-length 800
■ ping ip-address 24.103.5.7 packet-length 100
■ ping board UUCSS packet-length 1000
Output
The following example shows the output from the
ping ip-address
packet-length
command.
Screen 2-7. ping ip-address report
ping ip-address 192.68.3.26 packet-length 1500
TEST RESULTS
End-pt IP Port Port Type Result Time(ms) Error Code
192.68.3.26 01C0202 PPP-PT PASS 221 XXXX